FoodJet
Depositing heads placing white sauce in lines on rows of flatbreads on a conveyor

Food depositors for industrial production lines

A food depositor places a portion of sauce, cream, paste, batter, chocolate or oil on each product on your line. A FoodJet depositor does this from above, product by product: a photosensor or a vision camera detects each product on the belt, and a row of individually controlled nozzles deposits only where a product lies, in the pattern and amount set in the recipe.

What is a food depositor?

A food depositor is the machine on a production line that places a liquid or semi-liquid food on or into a product: sauce on a pizza base, cream on a cake, paste on bread, chocolate on a biscuit. Most depositors work to a fixed setting: a set portion through a set nozzle, at a set position, so the product has to be where the machine expects it. A FoodJet depositor works the other way around. It detects each product on the belt, and on machines with vision it measures where each product lies, so the nozzles deposit where each product actually lies.

How a FoodJet depositor places each portion

The depositing head is an array of nozzles across the full width of the belt, and each nozzle is controlled on its own.

  • Detection first: A photosensor or a vision camera detects each product as it passes. With vision, products do not need to be lined up or placed at fixed distances.
  • Only where a product lies: Each nozzle opens only above a product, so the material you pay for ends up on your product. A gap in the line gets no material.
  • The amount is in the recipe: The portion per product is the number of drops times the size of each drop. You set both in the recipe, together with the pattern.
  • A clean stop: Between deposits, a pinch valve squeezes the flexible product line shut, so the flow stops without tails or drips.
  • Change in software: A new pattern, portion or product is a different recipe, not new tooling.

On-demand depositing with a nozzle array

Volumetric depositor or on-demand depositor?

If you are comparing a FoodJet depositor with a volumetric or piston depositor, the main difference is where the portion goes. A piston depositor pushes a set volume per stroke through a set nozzle, at a set position, and the product has to be there at that moment. A FoodJet depositor places the portion as drops from a row of nozzles, only where a product has been detected. With vision, a product that lies crooked, or is a little larger or smaller, gets its deposit where it actually is.

See how this compares with other techniques: Depositing alternatives

Which products and materials can you deposit?

FoodJet depositors handle liquid and semi-liquid foods between 5 and 65 degrees Celsius:

  • Sauces, smooth or chunky, such as pizza and pasta sauces
  • Creams and cheese, such as whipped cream, cream cheese and liquid cheese
  • Pastes and batters, such as tiger paste and pancake or waffle batter
  • Chocolate and compound, for decoration, surface filling and depositing into waffle pockets
  • Oils and emulsions, for a controlled film

You find them on pizza, bread, cakes, biscuits, sandwiches and ready meals. FoodJet deposits from above, on an open surface or in an open form. Injecting into a closed product is not what these machines do.

Sauce on pizzas · Tiger paste on bread · Batter depositing · Jellies on biscuits · Materials and viscosity

By industry: Sweet bakery · Savoury bakery · Ready meals

Choosing a food depositor machine for your line speed

Line speed depends on your material. As a guide for a first estimate, pizza sauce runs up to 25 m/min and hot products such as chocolate around 10 m/min. For every application we confirm the figure in a trial. Machines range from mobile depositors for ambient-temperature or heated materials to large depositors with vision for wide belts. Depositors with a photosensor detect each product; depositors with vision also measure the position and outline of each product.

FoodJet depositing runs on 250+ production lines in 30 countries.

Food depositing line capacity · All machines · Product sheets

Frequently asked questions about food depositors

What does a food depositor do?

A food depositor places a portion of a liquid or semi-liquid food on or into a product on a production line, such as sauce on a pizza base or cream on a cake. A FoodJet depositor detects each product and deposits only where a product lies.

How does a FoodJet depositor differ from a volumetric or piston depositor?

A piston depositor pushes a set volume per stroke to a set position. A FoodJet depositor deposits drops from individually controlled nozzles, only where a product lies. The portion per product is the number of drops times the drop size, set in the recipe.

Can a FoodJet depositor inject into a closed product?

No. FoodJet deposits from above, on an open surface or in an open form, such as a pizza base, a cake or a waffle pocket.

Do I need new tooling for a different product or pattern?

No. Pattern, portion and product are set in the recipe, so a change is a software setting, not a tooling change.

How fast can a food depositor run?

It depends on your material. As a guide, pizza sauce runs up to 25 m/min and chocolate around 10 m/min. We confirm the figure for your product in a trial.

How do I find out whether my product runs on a FoodJet depositor?

Share your product and how it is prepared, and send a sample. We run it on our own equipment, so you see the deposit, the pattern and the speed on your own material. Read how testing and feasibility works.

Test it with your own product

Tell us what you deposit, on which product, and at what line speed. We run a trial with your own material.

Every FoodJet system is configured and quoted to fit your line and your requirements.